Strip and Seal

Expert tile restoration with a luxurious, modern touch.

1. Cleaning

The floor is thoroughly cleaned to remove dirt, dust, and debris. This ensures a clean surface for the stripping process.

2. Stripping

A stripping solution is applied to dissolve the old sealant. The solution is chosen based on the floor type to effectively break it down.

Process Of Strip and seal

The strip and seal process is a method to maintain and protect floors by removing old sealants and applying new ones. Here are the steps involved. For more information, visit Melbourne Tile Tech.

3. Scrubbing

The floor is scrubbed, often with a machine and stripping pad, to completely remove the old sealant.

4. Rinsing/Neutralizing

The floor is rinsed or neutralized to remove any residue from the stripping solution, preparing it for the new sealant.

5. Sealing

A new sealant is applied in thin, even coats. Multiple coats may be needed depending on the floor type and desired finish.

6. Drying

Each coat of sealant dries completely before the next is applied. The final coat should cure for the recommended time before use.

Floor Types Suitable for Strip and Seal

Floor Types

The strip and seal process is commonly used on the following floor types:

Vinyl and Linoleum

These durable floors are popular in homes and businesses and benefit greatly from strip and seal to maintain their look and longevity.

Concrete

Often found in commercial spaces, concrete floors are sealed to enhance their appearance and protect against wear.